a1082-a C the cost effective way to implement gps into your application get your position! because size matters! miniaturized footprint and minimal power consumption along with high-end performance characterize tyco electronics new gps module a1082-a. limited space is a typical constraint of handheld devices. the a1082-a provides nmea compliant pvt (position, velocity and time) information by requiring only 11 x 15 mm real estate. fastest start-up behavior and various power save modes, managed by hardware and software, will extend the lifetime of battery powered devices. a1082-a C one of tyco electronics solutions for easy and fast integration of gps based functionality into your designated application. highly sensitive w -157 dbm tracking fastest ttff (time to first fix) w < 37 s under cold start condition (typical) ultra small footprint w 14 x 11.4 mm a-gps support w for fastest start up behavior ultra-low power consumption w 65 mw average tracking current various power save modes 1) the receiver has estimates of time/date/position and valid almanac and ephemeris data. 2) the receiver has estimates of time/date/position and almanac. 3) the receiver has no estimate of time/date/position, and no recent almanac. channels 12 parallel tracking correlators 20,000 plus frequency l1 C 1,575 mhz sensitivity tracking -157 dbm acquisition (cold start) -142 dbm position accuracy (horizontal) < 2.5 m cep autonomous time to first fix hot start 1) < 1 s warm start 2) < 35 s cold 3) < 37 s standard gps software nmea message gga, gsa, gsv, vtg, switchable rmc, gll baudrate (in baud) 4,800 (default) to 34,400 serial ports 1.8 v cmos compatible tx0 nmea output rx0 nmea input performance communications temperature operating -30c to +85c storage -40c to +85c humidity non-condensing environment input voltage 1.75 to 1.85 vdc current draw tracking 35 ma (typical) (trickle mode) standby 7 a (typical) power mechanicals dimensions 13.97 mm x 11.43 mm x 2.4 mm 0.55 x 0.45 x 0.095 weight 1 g, < 0.05 oz
positioning receiver portfolio with the mission to support our customers to implement gps functionality into their systems, tyco electronics is offering a large product portfolio to cover almost all integration possibilities in an easy way. a dedicated r&d team located in ottobrunn, germany develops sensitive positioning solutions based on state of the art technologies. all gps products are manufactured in our iso9001 and ts16949 certified factory inside the eu. beyond that our modules follow rohs standard and are 100% electrically and functionally tested prior packaging. this way we constantly guarantee high quality products. the information provided herein is believed to be reliable at press time. tyco electronics power systems assumes no responsibility for inaccuracies or omissions. tyco electronics power syst ems assumes no responsibility for the use of this information, and all such information shall be entirely at the users own risk. prices and specifications are subject to change without notice. tyco electronics power systems does not authorize or warrant any of its products for use in life-support devices and / or systems. your partner: 1 pps antenna active antenna passive antenna status detection assisted gps connection plug-in connection solderable dead reckoning differential gps rtcm input flash, programmable gpio gps/utc raw data i2c interface memory free flash (byte) free sram (byte) power management mode processor: available power rom sbas support size (mm) spi interface uart nmea utm projection a1029-c 80k/16k 3 mips 28 x 22 x 3.2 a1029-d 80k/16k 3 mips 46 x 33 x 4.5 a1080-a/b 19 x 16 x 2.4 a1082-a 15 x 11 x 2.4 a1035-d 35.6 x 35.6 x 8 standard firmware: revision 1xx standard firmware: revision 2xx with custom firmware support copyright ? 2008, tyco electronics, raychem gmbh, power systems printed in germany tec.ps-001-0208.0-e headquarters emea: tyco electronics power systems finsinger feld 1 85521 ottobrunn, germany tel.: +49 (0)89 6089-838 fax: +49 (0)89 6089-835 gps@tycoelectronics.com www.tycoelectronics.com/gps products shown in actual size a1029-c a1080-a/b a1035-d a1082-a
|
